15
Index
Page
Description of the appliance
15
Instructions for use
15
Programming timer
15
Cleaning and maintenance 16
Problem solving 16
Sizes and specifications
17
Accessories supplied
18
Installation
18
Active charcoal filters
18
A
Electronic programmer control box
with buttons to control speed, light and
power in use indicators.
B
Metal filters.
C
Lamp with two bulbs - 20 W (G-4).
D, E
Vertically adjustable tubecovers.
F
Decorative part (Not incluided).
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
1.- The draft hood will remain on for 10
minutes at the selected level if pressed at
any speed for more than 2 seconds.
To programme a time other than the pre-
selected one (10 minutes):
a).- Press the "Timer" button with the draft
hood turned off.
b).- Select the intake time by pressing the
corresponding button. (See figure).
c).- Press the "Timer" button again.
d).- Press the chosen speed for more than 2
seconds, and the light will begin to flash.
Instructions for use
Description of the appliance
Maximum speed
Timer
Extra fan
Medium speed
Minimum speed
Light
3
2
1
3
2
1
Programming timer
Manual KND.3.qxd 15/10/2002 17:33 Página 15
