© Kurth Electronic GmbH, All Rights Reserved
2
ON
Mode
KE8x00
www.kurthelectronic.de
OFF
Light Source
nm
Hz
Warning
The laser could injure your eyes, never look directly at the laser out-
put or the connected optical fibre. Do not install fibres while the light
source is active and make sure that your eyes are protected at all
times.
Dust cover
Preparation
Insert two AA alkaline batteries into the battery compartment on the back of
the device. To do this, remove the drop protection.
Level meter detector port:
SC/PC, FC/PC, ST/PC interchangeable
and 2.5 mm universal ferrule
Hole for carrying strap
Removable drop protection
Battery indicator
Modulation display
Wavelength display
Auto-off display
Service port (without function)
ON key (Switch on)
Wavelength selection
Modulation key
OFF key (switch off)
Backlight
Back side:
Battery compartment – before changing
the battery (2 x AA Alkaline), remove the
rubber drop protection
