8 | Service and maintenance
Performing a HRSoft 2 update
b) Enter the word “password” into the "Login" window and click on “Login“.
ð
The following dialog will appear:
c) The settings must match the illustration in the figure, otherwise make the fol-
lowing settings:
d) Select controller “QoS”.
e) Select the optional field “Port based” under “Quality of Service“.
f) Highlight ports 7 and 8 under “Port Priority”.
g) Select menu item “High priority” for both ports in the drop-down menu.
h) Click on the “Apply” button to confirm all entries.
i) Power cycle the Rework System.
ð
The process has now been completed.
Ersa GmbH
Operating_instructions HR 500 DE 3BA00246-01 | Rev. 1
120 / 124
