6 | Function description
The [Management] tabulator with three dialog windows
ð
The dialog for taking four pictures will appear.
a) Click on button [Take image ].
ð
The first picture of the focusing small plate is taken.
a) Go on to the next work step.
b) Pull out the lever to switch to the Visionbox optical features.
c) Go on to the next work step.
d) Click on button [Take image ].
e) Go on to the next work step.
f) Slide the Visionbox in.
ð
The pipette picks up the focusing small plate.
a) Pull out the Visionbox.
b) Click on button [Take image ].
c) Go on to the next work step.
d) Push the lever in to switch to the Visionbox optical features.
e) Go on to the next work step.
f) Click on button [Take image ].
g) Go on to the next work step.
h) Slide the Visionbox in.
ð
The pixel shift is calculated.
Style
Rework
Archive
User administration
Profile management
Administration
HRSoft 2 options
Graph options
Device options
Back
Next
Preparation
Green Images
Red Images
Finished
Take image
Wide X:
Wide Y:
Tele X:
Tele Y:
The four values determined for wide-angle and telephoto lenses are displayed.
a) Go on to the next work step.
b) Fit a component tray under the heating head.
ð
Place the focusing small plate on it.
a) Bringing the component trays in the middle position
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
107 / 157