7 | Tutorial – Soldering or desoldering a component
Task 6 “Inspection”
Alignment
Desoldering
Alignment
Release
Inspection
Provide
Inspection
Soldering
Complete
Parameters
Green light intensity
Split optics
Next
Back
Darker
Automatic brightness
Brighter
Fig. 35:
Split screen view with simultaneous display of the four corners of a large component
a) You can zoom the Vision box image using the controller on the bottom right of
the camera image.
– Green light intensity: Checks the brightness of the green PCB lighting.
– Automatic brightness: When activated, the RPC camera image is automatically
adjusted after changing the camera lighting brightness or ambient light.
– Darker/Brighter: Checks the RPC camera lighting
a) Click on the button
to switch to the live image of the RPC camera in full-
screen display. The zoom controller allows further zooming. Use the left mouse
button to move the image section. Close the full-screen display by clicking on
the blue circle button in the upper right corner.
b) When the component is correctly positioned, slide the Vision box backward
and follow the instructions in the following steps.
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
136 / 157