6 | Function description
Overview of the machine parts
6.2 Overview of the machine parts
14
1
2
7
8
11
12
10
9
3
5
6
15
16
20
15
16
17
19
13
18
21
22
13
Fig. 17:
Overview of the machine parts
CAUTION
Risk of burning due to heated machine parts and PCB!
All heated machine parts as well as the surrounding housing parts and product sup-
port frame, the circuit board and the components become hot even during warm-up
to the process temperature [Tinit]!
Parts are particularly hot during the soldering process! After the soldering process,
wait until the device and the PCB have cooled down and reached non-hazardous tem-
peratures!
DANGER
Laser beam! Risk of injury due to retinal burns
a) Do not stare into the laser beam!
b) Do not point the laser beam at other people! Reflecting surfaces under the laser
generate reflections!
c) Class 2 laser according to DIN EN 60825-1:2008-5, P < 1 mW, λ = 650 nm
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
57 / 157
