6 | Function description
Editing the soldering profile in the [Profile management] tab and changing it permanently
3 Selecting a soldering profile. Search by profile
name possible. The buttons on top, from the left
to the right, allow you to:
– Create a new soldering profile
– Copy a selected soldering profile
– Delete a selected soldering profile
– Save a selected soldering profile
4 Chart / soldering curves. Display of the soldering
process with soldering curves for soldering and
unsoldering. The soldering curves may be
changed on the relevant curve points.
With regard to this, please read the The chart in
the [Profile management] tabulator
[
5 Parameter bar with the tabulators [Information]
and [Heater config] and small arrow key to recall
the [Image processing] dialog.
With regard to this, please read the Tutorial-
chapter.
6 Workflow bar for determining the process steps
(from the left to the right). With regard to this,
please also read the The [Process automation]
buttons under the [Profile management] tabu-
lator [
The functions of the [Profile management ] tabulator are in large part the same as
those of the tabulator [Rework] tabulator. For a description of the [Rework] tabu-
lator, please read the [Rework] tabulator overview [
You can access the tabulators [Archive], [User administration], [Profile manage-
ment], [Administration] and the button [Manual mode] tabulator.
The functions of the [Profile management] tabulator are described in detail in the
following chapter.
6.8.2 Create, copy, delete and save soldering profiles in the [Profile
management] tabulator
A soldering profile is a file in which the whole soldering process is defined. With the
list of soldering profiles, you may execute the following functions using the four
buttons (from the left to the right):
Search
Plus symbol = Create a new soldering profile
Duplicate file = Duplicate a selected soldering profile
Recycle bin = Delete a selected soldering profile
Floppy disk = Save a selected soldering profile
In the [Search] input field you may search the relevant profile names. The search
begins automatically as soon as the first characters have been entered. All existing
matches are marked in colour.
The soldering profiles have two rows for the definition of the PCB
and of the
component
. In these rows you may enter the relevant properties, such as
board thickness, high/low component mass and unleaded/leaded solder.
Create a new soldering profile
a) Click on the “plus symbol” on the soldering profile list.
ð
The [Select a profile name] window opens.
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
82 / 157
