background image

6 |  Function description

The [Management] tabulator with three dialog windows

– after relocating the Rework System.

With regard to this, please read Chapter The [Pixel shift adjustment] button.

[Select Mode]

Do not use

[Database information]

The database stores user profiles and soldering processes among other things. In
range [Database information] (see description of the following functions), correct
parameters must be entered to be allowed to access the database.

– [Select database server]: path to database. Click on button [Reload] to set the

correct path.

– [Database name]: selected path of the database.

– [Username]: assign any user name.

– [Password]: password for network access protection.

– [Repeat password]: password for network access protection.

– [Connection test]: Click on button [Test connection]. When the connection to

the database has been established, a checkmark will appear.

– Button [Test connection]: click on this button for checking. When the connec-

tion to the database has been established, a checkmark will appear in checkbox
[Connection test].

– Button [Save]: to save the database settings.

Button [Create backup]: The database has been secured. The database includes, for
instance, the soldering profiles, the archives and the system settings. A file with
*.bak file extension is created. Use this function to transmit the database data to
another computer.

Button [Database restore]: to read a protected database (file extension *.bak). For
database recovery, e.g. after reinstallation.

Also see

2

The [device settings] dialog [

}

 98]

Ersa GmbH

Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1

96 / 157

Summary of Contents for HR 550 XL






























































































































































Reviews: