6 | Function description
Editing the soldering profile in the [Profile management] tab and changing it permanently
6.8 Editing the soldering profile in the [Profile management] tab and changing
it permanently
6.8.1 Overview of the [Profile management] tabulator
In the [Profile management] tabulator, if you are logged in as administrator, you
may create edit, copy, delete and save new soldering profiles. If you are logged in
as a standard user, this tabulator is not available. The [Profile management] tabu-
lator corresponds in large part to the contents of the [Rework] tabulator, in which
you can edit the soldering profile without however saving the changes. In the [Re-
work] tabulator you can start and control the soldering processes. For a description
of the [Rework] tabulator, please read the Temporarily editing the soldering profile
in the [Rework] tab [
The [Profile management] dialog is divided into the following areas:
Combined
Rework
Archive
User administration
Profile management
Administration
Manual mode
Soldering
Desoldering
Name
Placement
Profile settings
Search
Heater config
Information
Board
Component
Control sensor
Adaptor (head)
Lens
pipette
Dip mode
Placement mode
Drop height
TC1
Distance 50 mm
L-head
Pipette 1
No automation
Placement
Heating head
Heating head position
Placement
Inspection
Soldering
Inspection
Desoldering
Soldering Desoldering
Synchronize
Process automation
Fig. 21:
Areas in the tabulator Profile management
1 Tabulator bar. To recall the tabulators and the
[Manual mode] button bar
2 Displays and buttons for recalling the dialogs,
from the left to the right:
– Display of the temperature of the relevant
temperature sensor
– Display icon green = Network connection
active; red = No connection
– Button “User name” for changing user
– Button for recalling the [System state] dialog
Button for closing HRSoft 2.
With regard to this, please read the The display
and button sequence in the right upper corner-
chapter.
Ersa GmbH
Operating instructions HR 550 XL EN 3BA00247-01 | Rev. 1
81 / 157
