Program Edit Mode
The CC Sequencer (CC SEQ) Page
3-35
CC Seq Preset
Use the CC Seq Preset parameter to recall factory or user created CC Sequencer settings. A
CC Seq Preset contains settings for all of the parameters on the CC SEQ page (except for
the State parameter, which is stored with the Program/Multi). Scrolling through the CC Seq
Presets is an easy way to discover the different possibilities of the CC Sequencer, or to find a
preset similar to what you want and continue to edit it from there.
You can save your current settings as a CC Seq Preset by pressing the SAVE SEQ soft button.
If you select a different CC Seq Preset before saving your current CC Sequencer settings,
the current CC Sequencer settings will be replaced by the settings from the preset without
showing a warning. Be sure to save your settings as a CC Seq Preset if you want to be able to
recall them after making additional changes. Even if you don’t save the current CC Sequencer
settings as a CC Seq Preset, the most recent settings will always be saved with the Program or
Multi when the Program or Multi is saved. Changing any of the CC Sequencer parameters
will change the Preset to “0 Edited CC Seq”, to indicate that the previous preset settings are
no longer being used.
State
Use the State parameter to turn the CC Sequencer On or Off.
Number Steps
Use the Number Steps parameter to set the number of steps in the sequence.
Sync
When the State parameter is set to On, the Sync parameter determines when the CC
sequence will re-start.
When the Sync parameter is set to Free Run, the sequence begins playing as soon as the
program is selected, and it restarts whenever it reaches the end of the sequence.
When the Sync parameter is set to Every Note, the sequence begins playing as soon as the
program is selected, and it restarts whenever it reaches the end of the sequence, or whenever a
new note is played.
When the Sync parameter is set to All Keys Up, the sequence begins playing as soon as the
program is selected, and it restarts whenever it reaches the end of the sequence, or whenever
all keys have been released.
When the Sync parameter is set to Arp, the sequence begins playing only when the program’s
arpeggiator is playing, and it restarts whenever it reaches the end of the sequence.
Summary of Contents for Flash Play PC4
Page 1: ... It s the sound Part Number 910587 002 Rev B ...
Page 9: ... ix MIDI Implementation A 1 Specifications B 1 Index I 1 ...
Page 289: ... 8 40 ...
Page 328: ... 10 7 ...
