Global Mode
MAIN Page
12-5
Sound Sel
The Sound Sel parameter is shown when the User Type parameter is set to Advanced. The
Sound Sel parameter determines the behavior of the Program/Multi Sound Select buttons
when selecting Program or Multis. When the User Type parameter is set to “Regular”,
category based sound selection will be will be used.
When Sound Sel is set to Category, the Program/Multi Sound Select buttons select one of
the 16 IDs in the currently selected category.
When Sound Sel is set to ID number, the Program/Multi Sound Select buttons behave
as a numeric pad, allowing you to select any Program or Multi (regardless of the currently
selected category) by typing the ID number and pressing the Enter button.
When Sound Sel is set to EnterButtn, you can scroll through the Program or Multi list
without immediately loading the selected Program or Multi. This allows you to find the next
Program or Multi to load without interrupting the Program or Multi that is currently being
played. When scrolling through the Program or Multi list, Programs and Multis will appear
with their names in parenthesis to indicate that they have not been loaded. Press the Enter
button to load the currently selected Program or Multi. When switching to Program or Multi
mode (either by using the Mode buttons or Favorites) the current Program or Multi will be
loaded automatically. When EnterButtn is selected, the Program/Multi 1-16 buttons work as
if SoundSel was set to “ID number”.
S.Buttons
The S.Buttons parameter allows you to set the function of the two leftmost soft buttons
in Program and Multi Mode. The default “Octave” setting will set the soft buttons as the
standard Octav- and Octav+ transpose buttons.
The “Arp” setting will change the soft buttons to an Arpeggiator Latch button, which
performs the Latch function of the Arpeggiator.
The “Rec/Play” setting changes the two leftmost soft buttons to “Rec” (record ready) and
“PlyStp” (Play/Stop). These buttons allow you to control the currently selected Song Mode
song from Program and Multi Mode. When an empty New Song is selected in Song Mode,
these buttons allow you to quickly record ideas into a new song from Program or Multi
Mode. (To record all Zones of a Multi, make sure the selected Song in Song mode has the
“RecTrk” parameter set to “Mult”). Press the Rec soft button to arm the sequencer (a.k.a.
record ready), and use the PlyStp soft button to start and stop the sequencer. The top bar
of the display shows the current state of the sequencer (Stopped, Rec Ready, Recording, or
Playing).
