Kurzweil Forte SE Musician'S Manual Download

Page: 318 / 374

System Mode

System Update

14-3

2. Connect the flash drive to the USB STORAGE slot of Forte SE.
3. Follow the instructions specified on

page 14-1

to enter System Mode.

4. In System Mode, select System Update.
5. Select USB Device as the storage type.

6. If the system was able to read the USB flash drive that was plugged in, it will display

a list of files and folders as shown above. You can use the navigation buttons or Alpha

wheel to move up and down the list. Select the UP soft button if you want to go up to

the parent directory level. If the KUF file is selected, select the OK button.

Summary of Contents for Forte SE























































































































































































































































































































































































Search results

Summary of Contents for Forte SE

Reviews:

Related manuals for Forte SE

Brands by name

Popular brands

Kurzweil Forte SE, Musician'S Manual

Search results

Summary of Contents for Forte SE

Reviews:

Related manuals for Forte SE

Brands by name

Popular brands