Features of the Forte SE
Navigation
3-11
Display Contrast Knob
You can adjust the display contrast by turning this small potentiometer knob.
Previous (–) and Next (+) Value Buttons
Use the Previous and Next buttons to scroll through the list of values for the currently selected
parameter. Pressing both the Previous and Next buttons simultaneously is referred to as the
Value Jump double button press. Depending on the selected parameter, Value Jump can
select the next Category default Program/Multi, jump to commonly used values, and reset
parameters to default values. For more information, see
.
Soft Buttons
These buttons immediately below the display change their functions depending upon which
screen is being displayed. The functions of the soft buttons on each screen are described in the
bottom row of the display.
Navigation Buttons
The Navigation buttons move the cursor in the LCD display and allow you to select the
current parameter to be edited.
Channel/Layer/Zone Buttons
Use the Channel/Layer/Zone buttons to change the current MIDI Channel in Program
mode, the current Layer in Program Edit mode, or the current Zone in Multi Edit mode.
Alpha Wheel
Use the Alpha Wheel to scroll through the list of values for the currently selected
parameter—turning the Alpha Wheel counter-clockwise will select the previous value and
turning the Alpha Wheel clockwise will select the next value. Turn the Alpha Wheel slowly to
change the value by one increment or turn it quickly to jump several increments.
