Program Edit Mode
The Parameters (PARAMS) Page
7-10
On the Parameters page, you can press the Edit button to see a Parameters Destination field,
which shows the CC number that it sends to parameters on the VAST pages. A parameter’s
Destination is automatically set when the Parameter is created, and can not be changed.
Alternatively, if you have changed Control assignments on the Parameters page and are no
longer sure which VAST source assignment goes with which Parameter on the Parameters
page, you can quickly find the associated parameter by selecting the VAST source field
and pressing the Edit button. This will jump to selecting the associated parameter on the
Parameters Page.
The Parameters (PARAMS) Page
Press the PARAMS soft button to display the Parameters page.
Column
Range Of Values
Parameter
Program / Effect Chain dependent
Control
Physical controller or MIDI CC
Value
None, 0 to 127
The Parameters page shows a list of every parameter in the current program that has been
assigned to be controlled by one of the Forte SE’s physical controllers (or by an external
MIDI CC number). The Parameters page allows you to edit the name displayed for each
controller assignment, select a different controller assignment, and set an initial MIDI value
for each controller assignment. All VAST, KB3 and FX parameters that have been assigned
to a controller or MIDI CC number are shown. When controller or MIDI assignments
are made on other Program or FX Edit pages, or if an FX Chain is selected which contains
controller assignments, these parameters are automatically added to the Parameters page.
Parameter
The Parameter (left) column shows a list of every parameter in the current program that has
been assigned to be controlled by one of the Forte SE’s physical controllers (or by an external
MIDI CC number). Effect Chain parameters are named with prefixes based on their effect
type, either “INS” for parameters from Insert effects, "LFX" for parameters from layer effects,
or “AUX1/AUX2” for parameters from Aux effects.
