21
MAINTENANCE
Cleaning :-
Periodically wipe the case with a damp
cloth do not use abrasives or solvents.
Calibration :-
Calibrate your instrument once a year
to ensure that it performs according to its
specifications.
7) Do not use the AC power adapter in a high
temperature or wet place.
8) Please make the AC power adapter avoid a strong
bump.
9) It is normal when the AC power adapter make
some noise in use.
1) Please use the original AC power adapter, using
other AC power adapter may damage your
instrument.
2) The AC power adapter can only be used indoors.
4) Do not use the AC power adapter in other equipment
except this instrument.
5) In use, it is a normal phenomenon that the AC power
adapter will be hot.
6) Do not demolish the AC power adapter. Otherwise, it
may be dangerous
WARNING:
3) Please plug the AC power cord into an electrical
outlet first and then firmly insert DC plug into DC
input end in the right of the meter. When unplugged,
firstly pull out the DC plug perpendicular to DC input
end and then unplug the AC plug from the electrical
outlet.
Figure 14
GUARD
GUARD
L
CUR
L
POT
H
POT
H
CUR
OPEN
Note : To get the better accuracy, when using
L
CUR
/L
POT
/ H
POT
/H
CUR
/ terminal measured with the
alligator clip-testing lines, Please insert the open
soket to the square terminals (shown in figure 14).
If there are some changes in accessories, please
refer to the real products as standard.
ACCESSORIES
=
User manual.
=
AAA batteries
=
Shielding clip line
=
Kelvin 4-terminal measure line
=
Short socket
=
USB line (USB model only)
=
PC-Link software CD
(USB model only)
One piece
Six piece
One piece
One piece
One piece
One piece
One piece
Turn off the power of the instrument. When you
change the battery, and screw off the breechblock
on the battery cabinet cover, then take off it and
replace with fresh battery.
Replacing the Battery :-
Please change the
battery when the battery symbol is less than
one segment.
22
