background image

WARRANTY

Each  “KUSAM-MECO”  product  is  warranted  to  be  free  from 

defects  in  material  and  workmanship  under  normal  use  & 

service.    The  warranty  period  is    one  year  (12  months)  and 

begins from the date of despatch of goods.  In case any defect 

occurs in functioning of the instrument, under proper use, within 

the  warranty  period,  the  same  will  be  rectified  by  us  free  of 

charges,  provided  the  to  and  fro  freight  charges  are  borne  by 

you.

This warranty extends only to the original buyer or end-user 

customer of a “KUSAM-MECO” authorized  dealer.

This  warranty  does  not  apply  for  damaged  Ic’s,  burnt  PCB's, 

fuses,  disposable  batteries,  carrying  case,  electrodes  probes, 

cables or to any product which in “KUSAM-MECO’s” opinion, has 

been misused, altered, neglected, contaminated or damaged by 

accident or abnormal conditions of operation or handling.

“KUSAM-MECO”  authorized  dealer  shall  extend  this  warranty  on 

new and unused products to end-user customers only but have no 

authority  to  extend  a  greater  or  different  warranty  on  behalf  of 

“KUSAM-MECO”.

“KUSAM-MECO’s” warranty obligation is limited, at option, free of 

charge  repair,  or  replacement  of  a  defective  product  which  is 

returned  to  a  “KUSAM-MECO”  authorized  service  center  within 

the warranty period.

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN 

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR    FITNESS  FOR  A  PARTICULAR  PURPOSE.    “KUSAM-MECO”  SHALL 

NOT  BE  LIABLE  FOR  ANY  SPECIAL,  INDIRECT,  INCIDENTAL  OR 

CONSEQUENTIAL  DAMAGES  OR  LOSSES,  INCLUDING  LOSS  OF  DATA, 

ARISING FROM ANY CAUSE WHATSOEVER.

All transaction are subject to Mumbai Jurisdiction.

24

This  Test  Certificate  warrantees  that 

the  product  has  been  inspected  and 

tested in accordance with the published 

specifications.

QC

PASS

KUSAM-MECO

TEST CERTIFICATE

Multifunction LCR

MODEL NO.   __________

KM 520B

SERIAL NO. ___________

MUMBAI

DATE: ___________

ISO 9001

REGISTERED

23

Summary of Contents for KM 520B














Reviews: