“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
Autocheck : DCV/AC (50~60HZ) 1mV~1000V.
4) OPERATION
CAUTION
B e f o r e a n d a f t e r
h a z a r d o u s v o l t a g e
measurements, test the
voltage function on a
known source such as
l i n e v o l t a g e t o
determine proper meter
functioning.
17
Note:
*Range-Lock and Function-Lock Feature: When a measurement
TM
reading is being displayed in AutoCheck mode, press the
RANGE or SELECT button momentarily 1 time can lock the range
or function it was in. Press the button momentarily repeatedly to
step through the ranges or functions.
TM
AUTOCHECK MODE
This innovative
feature automatically selects
TM
AutoCheck
measurement function of DCV, ACV or Resistance ( ) based on
W
the input via the test leads.
—
With no input, the meter displays "Auto" when it is ready.
—
W
With no voltage signal but a resistance below 60M is
present, the meter displays the resistance value. When
below " Audible Threshold" is present, the meter further
gives a continuity beep tone.
—
When a signal above the threshold of 1.5V DC or 3V AC up
to the rated 1000V is present, the meter
displays the
voltage value in appropriate DC or AC,
whichever larger in
peak magnitude.
18
