“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
27
PC COMPUTER INTERFACE CAPABILITIES
The instrument equips with an optical isolated interface port at
the meter back for data communication. Optional purchase PC
USB interface kit
BU-82X
is required to connect the meter to the
PC computer.
MAX/MIN/AVG* (REC) at fast 20/s measurement mode
Press
REC
button momentarily to activate MAX/MIN/AVG*
recording mode. The LCD “R” & “MAX MIN AVG*” turn on, and
the reading update rate will be increased to 20/second. The meter
beeps when new MAX (maximum) or MIN (minimum)
reading is updated. AVG* (Average) reading is calculated over
time. Press the button momentarily to read the MAX, MIN, MAX-
MIN and AVG* readings in sequence. Press the button for 1
second or more to exit MAX/MIN/AVG* recording mode. Auto-
ranging remains, and Auto-Power-Off is disabled automatically in
this mode.
28
Backlighted display
Press
SELECT
button for 1 second or more to toggle the LCD
backlight. The backlight will also be turned off automatically after
32 seconds to extend battery life.
TM
Beep-Jack Input Warning
The meter beeps as well as displays
“InEr”
to warn the user
against possible damage to the meter due to improper
connections to the
m
A, mA or A input jacks when other function
(like voltage function) is selected.
Hold
The hold feature freezes the display for later view. Press
the HOLD button momentarily to toggle the hold feature.
Relative Zero mode
Button momentarily to toggle relative zero mode.
Relative zero allows the user to offset the meter consecutive
measurements with the displaying reading as the reference
value. Practically all displaying readings can be set as relative
reference value including MAX/MIN/AVG* readings. Press the
1ms CREST capture mode
Press
CREST
button momentarily to activate CREST
(Instantaneous Peak-Hold) mode to capture voltage or current
signal duration as short as 1ms. The LCD “C” & “MAX” turn on.
The meter beeps when new MAX (maximum) or MIN (minium)
reading is updated. Press the button momentarily to read the
MAX, MIN and MAX-MIN (Vp-p) readings in sequence. Press the
button for 1 second or more to exit CREST mode. Auto-ranging
(up range) remains, and Auto-Power-Off is disabled
automatically in this mode.
