“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
Do not measure any current that exceeds the current rating of the
protection fuse. Do not attempt a current measurement to any
circuit where the open circuit voltage is above the protection fuse
voltage rating. Suspected open circuit voltage should be checked
with voltage functions. Never attempt a voltage measurement
with the test lead inserted into the A/mA or A input jack. Only
m
replace the blown fuse with the proper rating as specified in this
manual.
Disconnect the test leads from the test points before changing
functions. Always set the instrument to the highest range and
work downward for an unknown value when using manual
ranging mode.
2) CENELEC DIRECTIVES
The instruments conform to CENELEC Low-voltage directive
2006/95/EC and Electromagnetic compatibility directive
2004 /108 / EC
INTERNATIONAL ELECTRICAL SYMBOLS
DC--Direct Current
AC--Alternating Current
Double Insulation or Reinforced insulation
Earth (Ground)
!
Caution ! Refer to the explanation in this Manual
Caution ! Risk of electric shock
Fuse
CAUTION
3
Display:
4 digits 10,000 counts Dual LCD Backlight
display
9999 counts: ACV, DCV, Hz & nS
LCD Display.
6000 counts: mV, mA,
m
A, A, Ohm
& Capacitance.
Automatic
Polarity :
Digital Display: 5 per second nominal;
Update Rate:
41 Segments Bar-graph: 60 per second max
Below approx. 7V
Low Battery:
o
o
0 C to 45 C
Operating Temperature:
Maximum relative humidity 80% for
Relative Humidity:
o
temperature up to 31 C decreasing linearly to
o
50% relative humidity at 45 C
2
Pollution degree:
o
o
-20 C to 60 C, < 80% R.H.
Storage Temperature:
(With battery removed)
Operating below 2000m
Altitude:
SPECIFICATIONS :
GENERAL SPECIFICATIONS :
4
Data logging :
10800 Points (KM521)
87000 Points(KM525)
