“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
“KUSAM-MECO”
AN ISO 9001:2015 COMPANY
CREST MODE (INSTANTANEOUS PEAK HOLD)
Accuracy :
Specified accuracy adds 250 digits for changes
> 1.0 ms in duration
RECORD MODE
Accuracy :
Specified accuracy adds 10 digits for changes
> 100 ms in duration
LOGIC LEVEL FREQUENCY ( Hz) & DUTY CYCLE (D%)
@DCmV
FUNCTION
1)
ACCURACY
Frequency
5.00Hz ~ 1.000MHz
RANGE
Duty Cycle
0.00% ~ 100.0%
0.004% + 4d
2)
3d/kHz + 2d
1)
Sensitivity :
2.5Vp (Square wave) for 3V & 5V Logic Family
2)
Specified Frequency :
5Hz ~ 10kHz
NON-CONTACT EF-DETECTION
TYPICAL VOLTAGE
BAR GRAPH INDICATION
20V (tolerance : 10V ~ 36V)
55V (tolerance : 23V ~ 83V)
100V (tolerance : 59V ~ 165V)
220V (tolerance : 124V ~ 330V)
440V (tolerance : > 250V)
live wires, such as distinguishing between live and ground
to the field strength
Connections, use the Red (+) test probe for direct contact
measurements.
Indication : Bar graph segments & audible beep tones proportional
Probe-Contact EF-Detection : For more precise indication of
Detection Frequency : 50/60Hz
Detection Antenna : Top end of the meter
13
3) PRODUCT DESCRIPTION
1) 4 digits 9999 counts dual
displays
2) Push-buttons for special
functions & features
3) Selector to turn the Power
On or Off and Select a
function
4) Input Jack for 10A (20A for
30sec) current function
5) Common (Ground reference)
Input Jack for all functions
6) Input Jack for all functions
EXCEPT current
( A, mA, A) functions
m
7) Input Jack for milli-amp &
micro-amp current functions
The analog bar graph provides a visual indication of
measurement like a traditional analog meter needle. It is excellent
in detecting faulty contacts, identifying potentiometer clicks, and
indicating signal spikes during adjustments.
Analog bar-graph
14
