background image

Display:

 4-4/5 digits 50,000 counts. Selectable 

               stable mode  5-4/5 digits 500,000counts  
               for DC Voltage, & 6 digits 999,999 counts
               for Hz

Polarity :

 Automatic

Update Rate:

4-4/5 digits fast mode     :  5 per second nominal;
5-4/5 digits stable mode :  1.25 per second nominal;
42 Segments Bar graph :  60 per second max

o

Operating Temperature :

 0 C to 45 C

Relative Humidity :

 Max. relative humidity 80% for 

o

                                  

temperature up to 31 C 

                                  decreasing linearly to 50% 

o

                                  relative humidity at 45 C

Pollution degree :

 2

o

o

Storage Temperature :

 -20 C to 60 C, < 80%R.H. 

                                       (with battery removed)

Altitude :

 Operating below 2000m

Temperature Coefficient :

 nominal 0.1 x 

                                            (specified accuracy)/

o

o

o

o

o

                              C@(0 C -- 18 C or 28 C -- 40 C),
                             or otherwise specified.

Sensing : 

AC, AC + DC True RMS

Safety :

 Double insulation per IEC61010-1 2nd Ed., 

EN61010-1 2nd Ed., UL61010-1 2nd Ed. & CAN/
CSA C22.2 No. 61010.1-0.92 to Category III 1000V
AC & DC and Category IV 600V AC & DC.

o

3)     GENERAL SPECIFICATIONS

KM857 Terminals (to COM) ratings:

       V :           Category III 1000V AC & DC, & 
                      Category IV 600V AC & DC.
      A/mA

m

A : Category III and Category IV 600V 

                       AC and 300V DC.

4

KM859CF Terminals (to COM)ratings:

     V/ A /mA

m

A : Category III 1000V  AC  & DC, 

                          and Category IV 600V AC & DC.

Overload Protections :
KM 857 : 

m

A & mA                : 1A/600V, IR 10kA or better, 

                                 F Fuse
A                            : 10A/600V, IR 100kA or better, 
                                 F Fuse
V                            : 1050Vrms, 1450V peak

mV, 

W

 & Others     : 600V DC & V AC rms

KM 859CF : 

m

A & mA                : 0.44A/1000V,IR 10kA or better,

                                F Fuse
A                            : 11A/1000V, IR 20kA or better, 
                                 F Fuse

V, mV, 

W

 & Others : 1050Vrms, 1450V peak

Transient Protection :

 8kV (1.2/50

m

S surge)

E.M.C.:

 Meets EN61326-1:2006 (EN55022, 

EN61000-3-2, EN61000-3-3, EN61000-4-2,
EN61000-4-3, EN61000-4-4, EN61000-4-5, 
EN61000-4-6, EN61000-4-8,EN61000-4-11)

In an RF field of 3V/m:
      Capacitance function is not specified
      Other function ranges : 
      Total Accuracy =Specified A100Digits
Performance above 3V/m is not specified.

Power Supply : 

Single 9V battery.

Power Consumption :

 6mA typical

Low Battery :

 Below approx. 7V

APO Timing :

 Idle for 17 minutes

5

Summary of Contents for KM 857






















Reviews: