Kusina G7I100E, Instruction Manual

OPERATOR INSTRUCTIONS 
 

WARNINGS



Pay attention not to contact hot surfaces of the device! 



Device is designed for professional use and must be used only by person who are trained for this 
intention. 



Device is intended for cooking, do not use for another purpose. 



If there is any failure in the device, disconnect electrical power by deactivating the main switch. 



Before starting to use the device, carefully clean the surfaces especially those to be in contact with 
foods. 



During first operation, device will emit fume and smell for a short period. This fume and smell is the 
result of the insulation material and the substances such as oil, etc. on the metal sheet surfaces. This is 
not dangerous and will disappear by itself. 



Clean the accumulated food residues that are burned and carbonized on the cooking platina with a 
suitable scraper everyday at the end of operation. If the said daily maintenance is not performed, 
accumulated burned food residues may cause a decline in cooking efficiency by creating a crust on the 
plate. After the end of daily cleaning, cover the plate surface with a thin layer of vegetable oil. 



Empty the oil drawer of the device periodically.  

MAINTENANCE



Do not perform maintenance when the device is loaded with electrical power. 



Commission only authorized services for maintenance and use genuine spare parts. 



Before it cools down completely, wipe the device with a cloth immersed in warm soapy water. 



Do not use cleaning substances and tools that may cause scratches on device surface. 



If required, use chemical cleaners. 



Clean the oil drawer inside the cabinet after each use. 



Do not clean the device with water or vapour pressure. Otherwise, you may cause electrical resistor 
failure. 



If the device will not be used for a long period, coat the surfaces with a thin layer of Vaseline. In case of 
any dangerous condition with the device, notify to the authorized service. Never let unauthorized people 
to interfere in the device. 

IMPORTANT



If the device is operated for a long time, the ground below it and its surrounding may be heated up to 80 
°C. Therefore, pay attention that the ground material is heat resistant. 



Do not operate the devices with its adjustable legs removed. 

START-UP

 (Figure 02) 



Turn switch a “A” to position “1”. 



Adjust thermostat “1,2” to desired temperature. 



When signal lights “C 1,2” are off, platina reaches to the desired temperature. You can now start to 
cook. 

TURNING OFF

 (Figure 02) 



Turn thermostat “B” to position “O”. 



 Turn switch “A” to position “O”.