Settings Menu
Figure 5
– Settings Menu with custom file name set.
To input a new file name, press the “Enter” key at the
Your File Name
screen. Use
the + and – keys to select the characters and press “Enter”. The cursor will move to
the next space. Once all (8) characters are entered, the screen will read “Custom File
Name Successfully Set”, then the screen goes back to the
Return to Main Menu - +
Enter
screen. Press “Enter” to return to the main screen.
•
Format SD Card
- Erasing data on the SD card can be done while the data recorder is
mounted inside the trailer enclosure. This feature is used to delete any existing files on the
SD card. Press the Enter button to use this feature. The display will read “Insert card (– to
cancel)”. To erase the card, insert the card into the memory slot located on the right side of
the data recorder. When it’s finished, the display will read “Format Done, Remove Card”.
The SD card must now be removed to return to the menu features.
•
The
Radar Type
and
Radar Speed
should only be changed if directed by an authorized
technician.
2) Error Messages
ERR! Card Lost (Press any Key)
If the SD card is removed without stepping thru the saving data section, this error will
appear. Go back to
Section 1
to record new data. Note: Data is written to the card as
vehicles are recorded. The data can be recovered if the card is not cleared.
Write Error/Card Error! Try another SD or Format Card.
If the SD card is bad or full, this message will appear. If the card is bad, try re-formatting it
in the data recorder side slot or your personal computer (if equipped to do so, see NOTE
under “formatting card, as listed above). If this does not remove the error, the card is likely
bad and needs to be replaced.
File Name Max Reached, Clear SD Card or Set Custom Name
If you have tried to use the same file name 10 times, this error will display. To resolve the
error, you can do any or all of the following:
•
Create a new file name.
•
Clear the file name (so the date will be used).
•
Format the SD card, erasing the older files.
