background image

IMPORTANT SAFETY INSTRUCTIONS 

Danger 

Exposure to extremely high noise levels may cause a 

permanent hearing loss. Individuals vary considerably to noise 

induced hearing loss but nearly everyone will lose some 

hearing if exposed to sufficiently intense noise for a sufficient 

time.  

The U.S. Government's Occupational Safety and Health 

Administration (OSHA) has specified the following 

permissible noise level exposures: 

DURATION PER DAY (HOURS)  8      6       4     3      2        1        

SOUND LEVEL (dB)                     90    93     95   97   100   103    

According to OSHA, any exposure in the above permissible 

limits could result in some hearing loss. Earplugs or protectors 

in the ear canal or over the ears must be worn when operating 

this amplification system in order to prevent a permanent 

hearing loss. If exposure in excess of the limits as put forth 

above, to insure against potentially harmful exposure to high 

sound pressure levels, it is recommended that all persons 

exposed to equipment capable of inducing high sound pressure 

levels, such as this amplification system, be protected by 

hearing protectors while this unit is in operation.      

THIS SYMBOL IS INTENDED TO ALERT THE 

USER TO THE PRESENCE OF NON-INSULATED  

"DANGEROUS VOLTAGE" WITHIN THE 

PRODUCT'S ENCLOSURE THAT MAY BE OF 

SUFFICIENT MAGNITUDE TO CONSTITUTE A 

RISK OF ELECTRIC SHOCK TO PERSONS. 

THIS SYMBOL IS INTENDED TO ALERT THE 

USER TO THE PRESENCE OF IMPORTANT 

OPERATING AND MAINTENANCE 

(SERVICING) INSTRUCTIONS IN THE 

LITERATURE ACCOMPANYING THE UNIT. 

APPARATUS SHALL NOT BE EXPOSED TO 

DRIPPING OR SPLASHING AND THAT NO 

OBJECTS FILLED WITH LIQUIDS, SUCH AS 

VASES, SHALL BE PLACED ON THE 

APPARATUS. 

1.  Read all safety and operating instructions before 

using this product. 

2.  All safety and operating instructions should be kept 

for future reference. 

3.  Read and understand all warnings listed on the 

operating instructions. 

4.  Follow all operating instructions to operate this 

product. 

5.  This product should not be used near water, i.e. 

Bathtub, sink, swimming pool, wet basement, etc. 

6.  Only use dry cloth to clean this product. 

7.  Do not block any ventilation openings, It should not 

be placed flat against a wall or placed in a built-in 

enclosure that will impede the flow of cooling air. 

8.  Do not install this product near any heat sources; 

such as, radiators, heat registers, stove or other 

apparatus (including heat producing amplifiers) that 

produce heat. 

9.  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding-type plug 

has two blades and a third grounding prong. The 

wide blade or the third prong are provided for your 

safety if the provided plug does not fit into your 

outlet, consult an electrician for replacement of the 

obsolete outlet. 

10.  Protect the power cord being walked on or pinched, 

particularly at Plugs, convenience receptacles and the 

point where they exit from the 

apparatus. Do not break the 

ground pin of the power supply 

cord.

11.  Only use attachments specified by 

the manufacturer. 

12.  Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer or sold with the 

apparatus. When a cart is used, use caution when 

moving cart/apparatus combination to avoid injury 

from tip-over. 

13.  Unplug this apparatus during lightning storms or 

when unused for long periods of time. 

14.  Care should be taken so that objects do not fall and 

liquids are not spilled into the unit through the 

ventilation ports or any other openings. 

15.  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 

damaged in any way; such as, power-supply cord or 

plug is damaged, liquid has been spilled or objects 

have fallen into the apparatus, the apparatus has been 

exposed to rain or moisture, does not operate 

normally or has been dropped. 

16.  WARNING: To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or 

moisture. 

17.  When the MAINS plug, or an appliance coupler is 

used as the disconnect device, the disconnect device 

shall remain readily operable. 

18.  Protective Ground Terminal: The apparatus shall be 

connected to an AC main socket with a protective 

earth ground connection. 

Summary of Contents for KDA200













Reviews: