background image

Six-Source Six-Zone

Music Distribution Amplifier

KHS6640 OWNER’S MANUAL

SIX-ZONE AMPLIFICATION SYSTEM

MODEL KHS6640

ON

POWER

STANDBY

The KHS6640 is a six source, six zone music distribution amplifier that will fill your home

with the highest quality music of any system being built today. It offers unparalleled

features in a price range that is very affordable.

It features high quality 40 watt RMS Bi-Polar amplifiers per zone, with individual selection

and control of each source from each zone. Line outputs off of each zone easily allow

additional amplifiers or sub-woofer systems. With the 6640 you have independent IR

control of all of your audio sources from any room in the house. It also has an integrated

interface which allows for whole house paging in conjunction with your phone system,

and built-in front and back door chimes. A party mode allows you to select music source

and volume for all zones from one location.

  

A built-in IR routing system allows you to

operate CD players, satellite receivers, or any other equipment independently even though

the same manufacturer makes them and they respond to the same IR codes. Your 6640

system may be controlled by the KHS6S, single gang controller, or the KHS6D dual gang,

programmable Controller for complete IR control of your audio equipment from any room

of your house.

Innovative, rugged and reliable, sleek and unobtrusive, the KHS6640 represents the

finest, uncompromising American engineering and design utilizing the highest quality

components and manufacturing available, all at a price you can live with. Kustom has a

quality reputation of over 30 years in the music and audio industries and this is an

extension of that heritage.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for KHS-6640

























Reviews: