Port-A-Cool, LLC • 709 Southview Circle • Center, TX 75935
www.kuulaire.com • 1-888-999-6511
5
To obtain a current list of Replacement Parts, visit us
online at www.port-a-coolparts.com.
REPLACEMENT PARTS
PARTES DE REPUESTO
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
Symptom
Possible Cause
Possible Solution
No discharge of air
Cord is not plugged in
Make sure cord is plugged in and try to turn the unit on pressing buttons
Power is not on
on control panel and remote control. Check the circuit breaker or check
GFCI reset button.
The unit will not
Damaged PCB
Try to use remote control to see if unit responds
turn off
Remote Control Batteries
Check batteries.
Calcium Build-up in Blower
Deep clean unit — remove calcium debris.
Water Flow Control truned too low Change water flow control setting
Unit is making noise
Calcium Build-up in Blower
Deep clean unit — remove calcium debris.
Water Flow Control truned too low Change water flow control setting
Not cooling
Low/No Water
Check water level
Water Level Sensor is stuck
Drain/refill with fresh water and/or clean water tank
Odor Emission
Brand new unit
Brand new media will initially emit an odor which will dissipate within
a week of initial use.
Old Unit with algae
If the unit is not new, there may be an algae issue. Replace the rigid
media pads and clean the pads regularly.
Water droplets coming
Calcium saturated water
Drain water, deep clean and clean the media.
out of air outlet
Clogged media
Media may need to be replaced.
