9
8
HOW TO ASSEMBLE
The drum lid will not close unless the
juicing screw is all the way in.
Note |
STEP 1
Top-set Assembly
STEP 2
Top-set and Body Assembly
Place the juicing screw into the strainer.
Turn and press down on it until it clicks into
place.
Place the drum lid on to the juicing bowl
aligning the red dot
●
on the drum lid with
the red dot
●
on the juicing bowl. Turn the
drum lid clockwise until the red dot
●
on the juicing bowl is lined up with close
mark .
Check Before
Operating
• Wash the parts before first use.
• Ensure that the silicone ring is assembled properly.
2
3
4
6
Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Place the assembled top set onto the
juicer body, making sure to align the
arrow
▼
on the drum lid to the OPEN
mark on the base.
Turn the top set so that the arrow is aligned
with Close
.
5
For easy assembly hold the drum lid
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
TIP
Assemble the strainer into the rotation
wiper then place this assembly in to the
juicing bowl ensuring the red dot
●
on
the strainer is aligned with the red dot
●
on the juicing bowl.
1
Note | The juicer will not operate if the down arrow
▼
on the drum lid is not completely aligned
with the CLOSE mark on the body.
Open
Close
EN
