4
2.0. Unpacking:
Compressor with “double drain bottle system.”
2.1. Compressor box:
Open the box and lift up the compressor by the handle. It is a heavy item. Remove the plastic
bag. Inside the box is the instruction manual for the compressor, a bottle with oil, and a
plastic drainage bottle. In a small bag inside the compressor housing are the air filter and
black PVC nozzle for pouring oil into the compressor. Remove the two pieces of cardboard
wedged between compressor head and housing for transport. The compressor should not be
transported with oil inside unless you can guarantee that it will be in a vertical position at all
times. Position the compressor on a hard surface with plenty of air for ventilation!!! Do not
position it in a closed space, sun or in temperatures below freezing. The compressor will be
connected to the mains voltage.
2.2. Tonearm box:
On top of the box you will find this instruction manual. After lifting the top cover and second
layer of foam, remove the black armbase, one double silver filters with supporting stands, the
set of Allen keys and black PVC tubing. Lift filters out carefully because the filter stands are
not fixed onto the filters and they can slide down. Do not remove tonearm until you have
fixed the armbase onto the turntable.
