7
At the front of the compressor is a pressure regulator with filters and pressure gauges and at
the other end of compressor is the main cable and input air filter (oil refill).
In the plastic bag inside the compressor’s housing is an air intake filter and nozzle for filling
the oil.
Remove the small plastic cap from the metal input tube at the head of compressor, which is on
the same side as the mains cable.
Fix the nozzle onto the oil bottle, after cutting the metal cover on the oil bottle and 5-8 mm of
nozzle.
Putting the nozzle into the metal tube, gently squeeze all the oil into the compressor.
Double drain PVC bottles Compressor oil level in bubble
Compressor - rear view - air intake filter
At the side of the compressor is a glass bubble which will show the level of oil when the
compressor is not working. Wipe any spillage of oil and fix the air intake filter on to the
metal tube.
Locate the double PVC drain bottle which have three black 'quick fit' fittings at the top end of
bottle. There are three black tubes (6mm in diameter), which drain moisture from various
parts of the compressor (reservoir, filter, cylinder). Push them into the top of the fitting on the
bottle.
Optional: *Valve on drain tube on compressor:
For normal operation this should be open (level along the axis of the tube). If used in the same
room as the tonearm it should be closed to avoid noise at the end of the compressor working
cycle.
Air intake filter& oil filling
