Unpacking
The larger crate
contains the outer frame with top plate and lid.
Unscrew the top screws and remove the inner top foam. Remove side foam around lid first
and put it aside. Then remove the wooden floor plate and top foam. Remove the side foam
around the turntable and then two people should lift it up and position it on a strong support.
The smaller crate
contains the platter, subplatter, clamp, power supply, cables, armboard and
accessories,
Unscrew the top screws and remove the inner top foam. Then remove all parts except for the
platter and subplatter.
Accurately position the turntable. Remove the foam between the outer frame and top plate
then follow instructions for turntable assembly. Unpack subplatter and platter when needed.
Assembling
Turntable outer frame:
The outer frame of the turntable, which has four decoupling towers, is heavy. Lift it, being
careful not to scratch against metal parts of clothing, and position it in the middle of the
supporting board. You can now level the main frame horizontally with a spirit level. Rotate
the front spiked legs only. The rear leg is fixed.
Turntable outer frame
Top plate:
This is heavy .There are height adjustment knobs on the four corners of the top chassis and, in
the middle on the lower
main frame,
is the shaft with a fixed ruby ball.
Carefully position the top plate above the turntable frame and gently lower it onto the
decoupling towers, ensuring that the gap around the frame is even. There should be about a
5
