background image

 

Product registration and warranty extension:

 

Kuzma products has a non transferable  2 year limited warranty on parts and labour varied  by 
dealer/distributor in specific country.   
To achieve 5 years*  limited warranty from us, you need to register product on our web site 
within 30 days of purchase.  
We suggest to register products in any case because this will also help you to easier receive 
our technical support and with  resale product's  warranty. 
Simply register on our web site and  fill the requested forms and you  will receive in a few 
days extended five year warranty card on your email. * not valid for ex demo products. 
 
 
 

Stabi S PS AC turntable : Technical data 

 
Mass:                                    13 kg 
Platter:                                  4,8 kg  
Motor:                                  AC synchronous 
Speeds:                                 33, 45 rpm ( electronic) 
Dimension:                          400x 300x 140 mm 
PS mains:                             internal selectable  100-245V 
 
Optional: clamp, wooden platforms, various armboards,  adaptor for second tonearm, 12 inch 
versions,  
 
 

Safety Precautions: 

Electrical connection to the mains comes from the motor assembly via the cable.  Please keep 
the motor assembly and PS away from moisture and be careful not to  damage  cables.  If in 
doubt consult  your dealer. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for STABI S PS AC











Reviews: