CS6 · Connection
5
CS6 · C
onnec
tion
Standard Connection
Parallel connection of the CS6 (8Ω) - Total impedance 2Ω.
2 wire or 4 wire cable may be used, the AMP CHANNEL SELECTION switch does not apply.
Channel connection using single 4 wire cable (2 Channel Adapter Cable may be used - KVV 987 450).
Total impedance 4 Ω per channel. Channel switch for selecting Signal 1 or Signal 2.
Note: It should
NOT
be switched during passing of signal as this could potentially cause damage to the switch
or amplifier).
Signal 1
Signal 1
Signal 1
Signal 1
Signal 1
2 Channel Connection
Signal 1
Signal 2
Signal 2
Signal 2
Signal 1
1
2
1
2
1
2
Signal 1
1
2
