KV2 Audio ESP2000D, User Manual

ESP2000D · Important Safety Instructions 

ESP2000D A

mplifier  ·  I

mp

or

tan

t S

af

et

y I

nstr

uc

tions

Important Safety Instructions

Before using your ESP2000D Amplifier, be sure to carefully read the applicable items of these operating instructions  

and the safety suggestions. 

  1.  Read all product instructions.
  2.  Keep printed instructions, do not throw away.
  3.  Respect and rewiew all warnings.
  4.  Follow all instructions.
  5.  Do not use this unit near water, in unprotected out door areas or in rain or wet conditions.
  6.  Clean only with dry cloth.
  7.  Do not block any ventilation openings.
  8.  Install in accordance with KV2 Audio's recommended installation instructions.
  9.  Do not install near any heat sources such as heat radiators, heat registers, stoves or other apparatus that produce heat.
 10.  Do not defeat the safety purpose of the grounding type plug. A grounding type plug has two blades and a third    
 

  grounding connector. The third connector is provided for your safety. If the provided plug does not fit into your outlet,  

  consult an electrician for replacement of the obsolete outlet.

 11.  Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles.
 

  The AC mains plug or appliance coupler shall remain readily accessible for operation.

 12.  Only use accessories specified by KV2 Audio.
 13.  Unplug this Amplifier during lightning storms or when unused for long periods of time.
 14.  Refer all servicing to qualified service personnel. Servicing is required when the Amplifier has been damaged in any
 

  way, such as when the power-supply cord or plug has been damaged; liquid has been spilled or objects have fallen

  into the Vents; rain or moisture has entered the Amplifier; the Amplifier has been dropped; or when for undetermined  

  reasons the Amplifier does not operate normally.

 15.  Do not remove front or back panels. Removal of the panel will expose hazardous voltages.
 

  There are no user serviceable parts inside and removable may void the warranty.

 16.  An experienced user shall always supervise this professional audio equipment.  

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE PANELS.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. 

WARNING: 

To prevent fire or electric shock, do not expose this equipment to rain or moisture. 

SAFETY SUMMARY
To reduce the risk of electric shock, disconnect the Amplifier from the AC mains before installing audio cable.
Reconnect the power cord only after making all signal connections. Connect the Amplifier to a two pole, three- wire
grounding mains receptacle. The receptacle must be connected to a fuse or circuit breaker. Connection to any other type
of receptacle poses a shock hazard and may violate local electrical codes. Do not allow water or any foreign object to get 
inside the Amplifier. Do not put objects containing liquid on or near the unit. To reduce the risk of overheating the Amplifier, 
avoid exposing it to direct sunlight. Do not install the unit near heat-emitting appliances, such as a room heater or stove.  
This Amplifier contains potentially hazardous voltages. Do not attempt to disassemble the unit. The unit contains no user
serviceable parts, repairs should be performed only by factory trained service personnel.