Drawing
ESR215MkII Architects and Engineer's Specifications
The three-way, mid / high loudspeaker system shall incorporate two 15-inch mid-bass (MB) transducer a 8-inch mid range (MR)
speaker and a 1.4-inch exit compression driver high frequency (HF) transducer. The LF drivers shall be mounted above
and below mid / hi horn tuned for optimum mid-bass response and dispersion. The HF and MR transducers shall be loaded
on a integrated, constant directivity, wide dispersion mid/high horn assembly. The system has a nominal coverage pattern of
110° (horizontal) x 40° (vertical). The loudspeaker enclosure shall have a rectangular shape and shall incorporate, two top
handles. Enclosure incorporates M10 suspension points, three M10 suspension points on the top, one in the handles, three
M10 on the bottom and one M10 suspension point on the back. The speaker cabinet shall be finished with an ultra wear
resistant black polymer coating and fitted with a weather resistant perforated steel grill. The system shall receive power from
a separate ESR3000MkII Amplifer.
ESR3000MkII Amplifier - Controller module consisting of separate power amplifiers for high, midrange and midbass
transducers as well as signal processing including electronic band pass crossover filters, phase alignment, time correction,
equalization and speaker protection. The speaker system shall connect to the Amplifier/Controller Module via proprietary cables
terminated in Amphenol AP-6 connectors. The three-way mid / high loudspeaker system shall be the KV2 Audio ESR215MkII.
ESR215MkII · Drawing
32
ESR215MkII · D
ra
wing
