ESR Brackets and Flybars · Introduction · Warning
Introduction
This manual is presented by KV2 Audio, to enable the clear and precise instructions for the safe practice and execution
of overhead suspension, or flying of the KV2 Audio ESR Full range Loudspeaker products, using the ESR BRACKETS and FLYBARS.
It is vitally important that operators and users familiarize themselves with all of the components, parts, products and safety
instructions, as described and indicated within this document, before attempting any overhead suspension of the ESR
Brackets and Flybar systems.
The ESR Loudspeaker enclosures are designed with integral suspension points to facilitate secure vertical and Horizontal
suspension and rigging, providing that no modifications or external parts are substituted, and that all instructions are
adhered to at all times.
KV2 Audio s.r.o operates a continuing process policy of attaining and improving standards.
This means that instructions and methods may be subject to change without notification, and it is the sole responsibility
of the operator/user to check for any updated information regarding safe stacking and flying procedures whether locally
or Internationally.
Warning - Safety Rigging
There are accepted 'General Rigging Practices' appropriate to the entertainment industry and this Document aims to
encapsulate them specifically to the safe vertical and horizontal suspension of the KV2 ESR Loudspeaker systems described here.
It is extremely vital and important that only personnel whom have the qualifications and certificates, Prior knowledge and
experience of rigging techniques, attempt the execution of any suspension configuration utilizing the ESR Brackets and
Flybars for the KV2 ESR products.
All advice and instructions expressed and stated within this document, are based upon the highest engineering data
available at the time of publication, from within the Country of manufacture, with regards to materials and general practice
techniques.
Specifications are subject to change, due to constant testing, product updates and refinements and R&D.
'General Rigging Practices' means that Regulations and requirements are possibly subject to alterations in different countries
and may be superseded locally.
KV2 Audio, as such is not responsible for the safety of any suspension, flying overhead of all specific KV2 Audio Loudspeaker
products, or Rigging configurations as executed in practice by users.
It is expressly the sole responsibility of the user to ensure that at all times any KV2 Audio product, or system is Ground
stacked, suspended and rigged in accordance with current International and local regulations.
All non KV2 Audio products such as hoists, clamps, wires, truss, supports used, or required to assure stability, or suspend KV2
Audio Loudspeaker product are the sole responsibility of the user.
Warranty
Your ESR Brackets and Flybars are covered against defects in material and workmanship.
Refer to your supplier for more details.
Service
In the unlikely event that your ESR Brackets and Flybars develop a problem, it must be returned to an authorized distributor,
service center or shipped directly to our factory. Because of the complexity of the design, only qualified technical personnel
must attempt all repairs.
If the unit needs to be shipped back to the factory, it must be sent in its original carton, or suitable alternatives. If improperly
packed, the unit maybe damaged in transit.
To obtain service, contact your nearest KV2 Audio Service Centre, Distributor or Dealer.
ESR Br
ack
ets and F
lybars · I
ntr
oduc
tion ·
W
arning
6
