VHD BASS ARM (KVV 987 307)
VHD Flyware · Description
Description
VHD BASS ARM (KVV 987 307):
The VHD BASS ARM is a at steel bar with straight ends, a double groove joint at the lower end and prefixed apertures
to accept both D6 & D12.6 QUICK RELEASE PINS.
This bar is used exclusively to suspend a compliment of two VHD Subwoofers and a single bar is used on each side of the two
enclosures.
The bar employs a total of four angular wedges that are used to 'lock into' the handles on each side of the VHD Subwoofer
enclosure and are secured by the insertion of a single D6 QUICK RELEASE PIN, (Which are attached to the bar via small
shrouded steel ties) into each handle.
VHD BASS EXTENSION ARM (KVV 987 308):
The VHD SUBWOOFER EXTENSION ARM is of the same design and presentation as the VHD SUBWOOFER ARM, except
it is differentiated by being physically longer and employs a total of four angular wedges to allow locking into an attached-
secondary double hang of VHD Subwoofers and its enclosure handles.
The same method of inserting a single D6 QUICK RELEASE PIN into each handle is employed.
The arm has a poly-hex shape head at the top of the bar, with pre-fixed apertures for the insertion of the D12.6 QUICK
RELEASE PINS, and is attached to the lower end of the VHD SUBWOOFER ARM by sliding into the groove and then being
secured by the insertion of a single D12.6 QUICK RELEASE PIN.
To add extra enclosures to the hang, this method of attachment is repeated.
STEEL PULL-BACK ARRESTOR:
A steel chain is used as a pull-back to assist with obtaining desired angles of hang.
Using the pre-set identication coloured links in conjunction with the example diagrams allows quick and easy set-ups.
A small overhang chain collector bag is provided to protect and store the chain.
VHD1.0 DOWNFILL ARM (KVV 987 310)
VHD 1.0 DOWNFILL ARM (KVV 987 310):
The VHD1.0 DOWNFILL ARM is a short, at pre-angled steel bar that has two pre-fixed apertures at the lower end of the bar
to allow different angles of suspension from the enclosure above.
The arm is attached to the VHD1.0 down-fill enclosure by means of two apertures that receive the insertion of two D6 QUICK
RELEASE PINS.
The top of the bar is attached to the bottom of either the VHD2.0 TOP ARM
or BASS/VHD2.0 ARM by sliding into the groove and inserting a single
D12.6 QUICK RELEASE PIN.
VHD BASS EXTENSION ARM (KVV 987 308)
VHD F
ly
w
ar
e · Description
17