Overview of the 956X System
1-3
965X Service Manual
Calibration and Quality Control:
Two fixed end stops (left and right) are used for location index. These automatically retract when
end work is required next to the stop. Routers: The machine head includes two hi-frequency 3HP
spindle motors with double bearings, rotating in opposite directions. The counter-rotating spindles
are combined with tool path programming to eliminate chipping at the jamb edge. A third hi-fre
-
quency 1.5HP spindle is utilized as a point-to-point pre-drill system for hardware application.
Chisels:
The
965X
is equipped with four (4) chisels, mounted in pairs, for the square hinges for higher-end
markets
Safety:
An electronic zone sensor is included to prevent access to the machine while routers are turning or
the machine is moving. The backside of the machine is secured via metal fencing. purpose of
removing radii and providing near perfect square latch plates or
