Never
operate the machine without proper eye and
ear protection.
Protective Gear
•
Never
reach hands beyond safety cage. Servo
motors can unexpectedly move quickly.
•
Never
clear screws or hinges out of the machine
while it is running.
•
Never
reach into the router area to retrieve a
hinge. The router may still be running down
after shut down.
•
Never
perform any maintenance unless machine
is at zero state.
•
Never
clean the machine while it is running.
•
Never
walk away from the machine while it is
running.
When the Machine is ON
The compressed air system connected to this
machine should have a three-way air valve
for shut-off and pressure relief.
All cylinders on machine are under high
pressure and can be very dangerous when
activated. Before performing any mainte-
nance or repairs on this machine turn off the
main air disconnect.
Lockout and tagout
this connectio
n.
See “Lockout Tagout Procedure” on
page 1-8.
Compressed Air
Safety First!
1-5
KVAL 990-HB Operation / Service Manual
Summary of Contents for 990-HB
