10.
Load the hinges, one for each of the three Six-Shooter
heads with the hinge pin towards the top of the door.Each
of the three Six-Shooter heads has a hinge pocket in which
to place one hinge. The hinge pocket is magnetic and will
hold the hinge in place when the operator inserts the hinge
11.
Press the
Hinges Loaded
push button located on the center head.
12.
Press the
Start Sequence
push button located on the center head.
Caution:
Be prepared for the front section routers to move into
position and begin routing, as well as the back section routers, lock
bore, and bolt drill.
13.
When the process is completed the door will feed out and a new door will feed in
14.
To continue processing another door go to step 7.
Start Sequence
Button
Hinges Loaded
Button
Quick Start
2-18
KVAL 990-HB Operation / Service Manual
Summary of Contents for 990-HB
