Kvaser Memorator Professional User’s Guide
19 (37)
4
How to use the Kvaser Memorator Professional
The Kvaser Memorator Professional can operate both as a high performance real
time USB interface (USB-CAN mode) and as a data logger (logger mode). This
section will describe how to use the different modes.
4.1
Use as a CAN interface
To use the Kvaser Memorator Professional as a CAN interface; connect the unit to
a free USB socket on your PC or USB hub. You do not need to insert a flash disk.
If a flash disk is inserted, you do not need to remove it.
When used as a CAN interface, the green lamp will be illuminated
and the yellow lamps will emit short flashes when CAN messages
are transmitted and received.
4.2
Configure for logging
To prepare your Kvaser Memorator Professional for logging:
1. Connect the unit to a free USB socket on your PC or USB hub.
2. Insert a flash disk (see Figure 4 on Page 13)
3. Start the Kvaser Memorator Tools program and press the Connect button.
The device should immediately show a running light pattern on the LEDs.
4.3
Use as a logger
To use your Kvaser Memorator Professional as a logger:
1. Insert a formatted flash disk that contains a valid configuration
2. Optionally, connect an external trigger switch to the CAN1 connector
3. Optionally, connect the digital output pin on the CAN2 connector to your
equipment
4. Supply power on the CAN1 connector
Logging should start immediately.
Kvaser AB, Mölndal, Sweden — www.kvaser.com