Kvaser Memorator 2xHS v2 User’s Guide
13 (26)
3.7
Troubleshooting
Use “Kvaser Hardware” in the Control Panel to verify that the computer can
communicate with the Kvaser Memorator 2xHS v2. If the firmware version shown
is all zeros, there are communication problems.
If the LEDs are not flashing or do not light up at all, check the power supply. If the
battery has been depleted, no LEDs will light up. Connect the Kvaser Memorator
2xHS v2 to either a properly powered USB port or supply power through the CAN
connector and let the battery charge overnight.
Kvaser AB, Mölndal, Sweden — www.kvaser.com