Kvaser Memorator 2xHS v2 User’s Guide
17 (26)
4.2
Technical data
In Table 8 below you will find the Kvaser Memorator 2xHS v2’s technical
specifications.
CAN Channels
2
CAN Transceivers
MCP2561FD (Compliant with ISO 11898-2)
CAN Controller
Kvaser CAN IP in FPGA
Galvanic isolation
Yes
CAN Bit Rate
50 kbit/s to 1 Mbit/s
Time stamp resolution
100 µs
Max message rate (interface)
8000 msg/s per channel
Max message rate (logging)
8000 msg/s per channel
Error Frame Detection
Yes
Error Frame Generation
No
Silent mode
Yes
PC interface
USB Hi- and Full-Speed
External power
9–40 V
Power consumption
Up to 3W
Hardware configuration
Done by software (Plug & Play).
Software requirements
Windows Vista or later. (For other operating systems, contact
Kvaser support.)
Dimensions
55 x 150 x 23 mm for body incl. strain relief
Weight
155 g
Operating temperature
−20
◦
C to +70
◦
C
Storage temperature
−40
◦
C to +85
◦
C
Relative humidity
0 % to 85 % (non-condensing.)
Table 8: Technical Specifications
4.3
CAN connectors
Kvaser Memorator 2xHS v2 devices that use the 9-pin D-SUB connector (see
Figure 6) have the pinning described in Table 9 on Page 18.
Figure 6: The D-SUB 9 connector pin numbers
Kvaser AB, Mölndal, Sweden — www.kvaser.com