Kvaser Memorator Light User’s Guide
14 (23)
5
Appendices
In this section you will find technical information about Kvaser Memorator Light and
its connectors.
5.1
System requirements
A USB interface. Use USB 2.0 HiSpeed for optimum results, although the device
will work with a USB 1.1 interface too.
5.2
Technical data
In Table 9 you will find the Kvaser Memorator Light’s technical specifications.
CAN Channels
1 (CAN 2.0A and 2.0B active).
CAN transceivers (HS)
SN 65HVD251 (Compliant with ISO 11898-2:2003)
CAN signaling rate
10 kbit/s to 1 Mbit/s
Timestamp resolution
2 µs
Error frame detection
Yes
Autobaud
Yes
PC interface
USB 2.0. Supports HiSpeed (HS) at 480 Mbit/s. Compatible
with USB 1.1 at 12 Mbit/s.
Power consumption
~5 V and 130 mA if powered from the USB and ~850 mW if
powered from the CAN bus.
External power
Pin 9 (V+) and pin 3 (GND) on CAN channel 1.
Minimum operating voltage
6.2 V DC (cold start) and 5.6 V DC (during operation).
Maximum operating voltage
35 V DC.
Absolute maximum input voltage
48 V DC.
Software requirements
Windows XP or later. (For other operating systems, see
Kvaser web or contact Kvaser support.)
Hardware configuration
Done by software (Plug & Play).
Dimensions (W x L x H)
46 x 115 x 22 mm (1.8 x 4.5 x 0.9 inch)
Operating temperature
−40
◦
C to +85
◦
C
Weight
142 g including cables and connectors.
Storage temperature
−40
◦
C to +85
◦
C
Relative Humidity
0% to 85% (non-condensing.)
Table 9: Kvaser Memorator Light Technical specifications
Kvaser AB, Mölndal, Sweden — www.kvaser.com
