Kvaser Memorator Light User’s Guide
5 (23)
2
Introduction
This section will describe the functions and features of the Kvaser Memorator Light.
2.1
Welcome to Kvaser Memorator Light
Figure 1: Kvaser Memorator Light
The Kvaser Memorator Light is an advanced portable CAN data logger. The device
features two CAN message buffers that are used as ring (FIFO) buffers. One
buffer logs all messages on the bus. The other buffer logs approximately 1000
messages before and 1000 messages after any error frame.
When a ring buffer is full, it is automatically overwritten from the beginning. An
external LED indicates when either of the ring buffers is being overwritten.
The Kvaser Memorator Light automatically determines the correct CAN bus bit
rate, removing the need for configuration – just plug and play.
Also, the Kvaser Memorator Light has a built-in flash disk that cannot be
accidentally lost, misplaced, or mixed up with other disks.
Device
Product Number
Kvaser Memorator Light HS
733-0130-00513-6
Table 1: The Kvaser Memorator Light device described in this manual
Kvaser AB, Mölndal, Sweden — www.kvaser.com
