Chapter 3: Operating the system
Using a phone
26
Handling waiting calls
During a call, if a second party tries to call you, you may hear a Call Waiting
indication. The Call Waiting indication is two beeps and a pause of 3 seconds, then
two beeps again etc. If no action is taken, the waiting call is released.
In the web interface you can enable or disable the call waiting indication. For further
information, see
For phones with an
R
key (normally on analog 2-wire phones): When you receive a
Call Waiting indication, you have the following options:
Note
Different types of phone have different methods/keys for the functions
listed below. If you have another type of phone than the ones listed below,
refer to the documentation for your phone/handset.
If you want to:
Do as follows (standard 2-wire phone):
Clear the current call, and
accept the waiting call.
Press
R
1
#
Hold the current call, and
accept the waiting call.
Press
R
2
#
Ignore the waiting call.
Take no action.
Reject the waiting call.
Press
R
0
#
Summary of Contents for TracPhone FB150
Page 1: ...User s Guide TracPhone FB150...
Page 132: ......
