background image

42    |    kvm-tec

kvm-tec    |    43

4. Network SettiNgS

4. Network SettiNgS

3.  log in with your user name and password. the 

Network Setting

 menu opens. note: in  

 

 

order to prevent unauthorised access to the network settings, this option is protected  

 

 

by a user/password combination. access is only allowed for users with administrator rights.    

 

the factory settings provide an administrator user with User: admin and Password: admin.

 

 

•  The Master View option allows the administrator to view, add, edit or remove user,    

 

 

  console and computer information. Press the 

V

 key to access the Master View menu.

 

 

•  The Network Mode allows to define how you want the network system to operate.  

 

 

 

    each of the modes available may individually be activated or deactivated by pressing    

 

 

   the appropriate key. You may have more than one selected depending on their  

 

 

 

    function. some modes require others, and others are incompatible with each other,    

 

 

    but the system will automatically recognise this for you. Press the 

M

 key to access the  

 

 

  network Mode menu.

4.2 DISCONNECT OR SELECT A WORKSTATION FROM ThE 
CURRENT CONNECTED DEVICES

the connection overview provides an overview of the current connections as well as the free 
Pcs and consoles on the network. You may break a connection remotely, or assign a Pc a new 
console or vice versa.

To force disconnect or select a workstation from the current connected devices:

1.  Make sure the 

Master View

 menu is open (see chapter „How to access the network  

 

Settings menu (Master View and Network Mode)”).

 

Summary of Contents for 6502





































Reviews: