11
OPERATION
BASIC OPERATION
Turn the power switch at the rear panel to the ON Position. The LEDs on the panel will light up and the unit is now in initial mode for
operation.
INPUT SIGNAL SELECTION AND BACKGROUND COLOR SELECTION
→
Slide the Video slide
to the A-bus position.
→
Press any of the Source
thru Source
and Background color button. You will see the corresponding picture on the screen.
→
Press a Background color button to select the background color you need. Any of the 8 Background colors-Blue/Red/Magenta/
Green/Cyan/Yellow/White/Black can be selected by repeatedly pressing the Background color selection button
.
→
The same procedures applies to the B-bus.
* When the selected input source is not connected with a source input or HDCP protection, the image will show with Blue screen.
