EN
Instruction Manual
Hydropneumatic tool for rivet nuts from M3 to M10
with stroke and pressure adjustment
FASTSETM10
www.kvt-fastening.ch
2
WARNING
!
THE
BLIND
RIVET
NUTS
TOOL
IS
EQUIPPED
WITH
M4
TO
M8.
THE
EQUIPEMENT
M3
AND
M10
HAS
TO
BE
ORDERED
SEPARATELY
ACCORDING
TO
THE
USER
NEEDS.
FEATURES
P
LEASE CONSIDER THAT THE TOOL FEATURES TWO POSSIBILITIES
:
STROKE ADJUSTMENT AND PRESSURE REGULATION
.
W
ORKING WITH
PRESSURE
YOU CAN PLACE THE SAME INSERT NUT ON DIFFERENT THICKNESSES UNSCREWING
ALL THE RING NUT REF
.
10;
FOR EXAMPLE IF YOU HAVE AN INSERT NUT WITH A MAXIMUM GRIP RANGE OF
6
MM
,
YOU CAN ALSO PLACE IT ON A THINNER THICKNESS WITHOUT BREAKING THE TIE ROD
.
I
T IS POSSIBLE TO WORK
WITH
STROKE
ONLY
,
SCREWING ALL THE MANOSTAT REF
.
41
AND ADJUSTING THE
RING NUT REF
.10.
Y
OU HAVE TO USE
PRESSURE
AND
STROKE
TOGETHER WHEN YOU NEED THAT AFTER PLACING
,
THE
PROTRUSION IS UNIFORM
;
IN THIS CASE THE RING NUT HAS THE FUNCTION OF LIMITING THE STROKE
.
1.
Air Pneumatic piston return (without spring);
2.
Power piston air outwardly, not through the piston;
3.
Tie rods are now replaced by commercial screws;
4.
Additional unscrewing in case the user rivet nuts, unintentionally, an unsuitable insert, or in case it
gets stuck due to an un-proper regulation;
5.
When using the tool you can both regulate pressure and adjust stroke.
