Stand: 19.03.12
Seite 11
KW Hydraulik GmbH
Tel.:
03675/42198-0
Köppelsdorfer Str. 132
Fax:
03675/42198-11
D-96515 Sonneberg
e-mail:
info@kw-hydraulik.de
Germany
Internet: www.kw-hydraulik.de
SSBZ
SSBZ
SSBZ
SSBZ
picture 7: plate
Put the bending-punch with the below not on the guide rail and push the punch in
direction of the piston-bar until the latch stops and held it. Attention! Pull the latch!
Put the bending-die in the guiding-way from above.
After that put the contact rail in and adjust the height of the working-group with the
hand-wheel on a half height of the contact rail (see in picture 3). The height-scale at
the basic-device (picture 1) shows the distance between working-plate and piston-
axle.
Now the appliance is ready for working (picture 8).
picture 8: ready bending tool in the SSBZ-basic device
plate
Auflage