Stand: 19.03.12
Seite 2
KW Hydraulik GmbH
Tel.:
03675/42198-0
Köppelsdorfer Str. 132
Fax:
03675/42198-11
D-96515 Sonneberg
e-mail:
info@kw-hydraulik.de
Germany
Internet: www.kw-hydraulik.de
SSBZ
SSBZ
SSBZ
SSBZ
Index
1
Introduction ................................................................................................................................................. 2
2
Directions of safety ..................................................................................................................................... 3
3
Technical data for SSBZ ............................................................................................................................ 5
4
Starting of the basic device ........................................................................................................................ 6
4.1
hydraulical connection......................................................................................................................... 6
4.2
electrical connection............................................................................................................................ 7
4.3
settings of the height ........................................................................................................................... 8
4.4
operating of the survey-bar ................................................................................................................. 8
4.5
operating of the pump ......................................................................................................................... 9
5
Insertion of the tools ................................................................................................................................... 9
5.1
bending tool....................................................................................................................................... 10
5.2
punching tool ..................................................................................................................................... 14
5.3
cutting tool ......................................................................................................................................... 17
5.4
offsetting tool ..................................................................................................................................... 20
6
Searching for an error .............................................................................................................................. 22
7
Servicing, maintenance, storage and transportation................................................................................ 22
8
Guarantee-service .................................................................................................................................... 23
9
Drawings for assembling .......................................................................................................................... 24
10
Spare-part lists...................................................................................................................................... 33
11
Declaration of conformity ...................................................................................................................... 36
1
Introduction
The contact rail machining centre SSBZ consists of a basic device and different tools. It is
responsible for its easy handling and universal employability. The appliance can be
equipped by an easy changing of the tools at the basic device within a few seconds. Tools
for bending, punching, cutting and offsetting are available.
The basic device is used for working with aluminium or copper contact-rails to a maximum
cross-cut of 120 x 12 mm. Therefor it has to be connected by a high-pressure-hose at a
hydraulic-pump with a max. pressure of 700 bar and an output-work up to 1.5 l/min. The
required volume of the oil is around 0.15 l.
For the work we propose the electrical-hydraulic-pump NP-230 or ANP-24/230. There is a
selection of pumps with system-connection and also a combination of system-/battery-
pumps. All electronic-hydraulic-pumps are equipped with a control-electronic. This
electronic makes an automatically stop at a bending-angle which was chosen before. You
do not have the chance for using this function through an insertion of foreign-parts.